Download Addressing System - Priority Systems
Transcript
The Main Menu 8.8.5 Setting Selection of a configuration For different applications, a proper configuration can be created each. The configuration No. 0 is reserved for the factory setting. Here, no modifications can be executed. The configurations No. 1 to No. 9 may be set individually. When terminating the programming mode, the executed modifications are automatically saved in the selected setting no. You may block the adjusted setting for printer commands from the PC by pressing the OK key for a longer time. (A lock symbol appears in the display.) After switching the device off, the set configurations are maintained. At a default (factory) initialisation (Quick key is held pressed when switching on), all configurations are reset to the factory settings. 8.8.6 Initialization of the device without configuration reset To reach the factory configuration, select the option “No. 0” in the menu field “Setting” in programming mode. By pressing the “ENTER” key, the programming mode is finished. In the display, the indication "Set 0U" is given. The arranged configurations are maintained under the respective setting number (compare menu item “Setting”). with configuration reset To undo all modified values and configurations, switch the device off. Hold the “Prog” key pressed when switching the device on again. In the display, the following information will be given: Model 3630 Default Reset Now the device has assumed the factory settings again, and all configurations correspond to the factory configuration. The information “Set1U” is shown in the display.