Download BRIGHT BOX WIRELESS ROUTER

Transcript
7.In the ‘public port’ set the range of incoming
public ports that will be opened when the
trigger port is activated. You can enter a
single public port, multiple ports separated
by a comma (,) or a range of ports using a
dash (-). In this example we are using ports
6667,2300-2400,47624,28800,29000 for
MSN Gaming Zone.
8.In the ‘public type’ select either TCP or UDP
for the traffic type of the incoming ports.
In this example we are using TCP for MSN
Gaming Zone.
9.Tick the ‘enable’ box to enable the port
triggering entry.
10.Click Save Settings.
11.The settings will be applied and the port
trigger entry will now be enabled for your
application on all devices on your network.
NAT MAPPING TABLE
The NAT mapping table page contains a list of port forwarding entries for the current router session.
These port forwarding entries could reflect those created manually in the Port Forwarding page, or
those automatically established by the UPnP (Universal Plug and Play) feature of the router.
To access the NAT Mapping Table page:
1. Login to the router’s admin pages.
2.Click on the Advanced Set-Up tab and
click Accept on the ‘Please proceed with
caution’ page.
3.Click on NAT in the left hand navigation
menu to expand the NAT menu items
4.Click on NAT mapping table in the left
hand navigation menu.
You can refresh the NAT mapping table by
clicking the refresh button at the bottom of
the page.
106
EE Bright Box User Manual