Download CFW11 - Programming Manual
Transcript
Vector Control 11.7.1 Adjustment of the Parameters P0409 to P0412 Based on the Motor Data Sheet Being in the possession of the motor equivalent circuit data, it is possible to calculate the value to be programmed in the parameters from P0409 to P0412, instead of using the self-tuning to obtain them. Input data: Motor data sheet: Vn = Nominal voltage informed in the motor data, in Volts; fn = Nominal frequency informed in the motor data, in Hz; R1= resistance of the motor stator per phase, in Ohms; R2 = resistance of the motor rotor per phase, in Ohms; X1 = stator inductive reactance, in Ohms; X2 = rotor inductive reactance, in Ohms; Xm = magnetizing inductive reactance, in Ohms; Io = motor no load current; ω = angular speed. ω =2 x π x fn P0409 = P0410 = P0411 = P0412 = P0400 x R1 Vn Vn x Io x 0.95 P0400 P0400 x [X1 +(X2 x Xm)/(X2 + Xm)] Vn x ω P0400 x (Xm + X2) Vn x ω x R2 11 11-15