Download chapter 1

Transcript
researchers, providing a critical analysis of each method. However, the most commonly
used models for ageing studies under electrical stress only are the ‘inverse power law’
and the ‘exponential law’.
• Inverse Power Law:
The inverse power model is one of the most frequently used in the ageing
studies under electrical stress only. As summarised in
(48)
is described by the
following relationship:
L = k.V-n………….………………………….(2.2)
where L is the appropriate unit of time (in hours or years), V is the applied
voltage or electrical stress, and k and n are constants to be determined based
on the characteristics of a given material and the operation conditions of voltage
and temperature. If various data points of the above equation are plotted on a
log-log paper, it will result in a straight line (49).
• The Exponential law:
Next to the inverse power model, the exponential representation is the most
commonly used. The basic form of exponential law as reported in (49) is given by
the following relation:
L = c exp (-kV)………………………….….(2.3)
where, L is the appropriate unit of time (in hours or years), V is the applied
voltage, and c and k are constants to be determined based on experimental
data. Various data points of the above equation, if plotted on a semi-log paper
will result in a straight line.
The industry has developed over the years, various empirical relations for the
prediction of insulation life of electrical systems and most relationships are variations of
the above two models. Brancato published a paper (50) summarising the various voltage
endurance relations and stated the belief of many researchers that there is no
deterioration of insulation below discharge inception voltage, thus increasing the
insulation life significantly. Modified versions of the above equations have been
developed (51, 52) that provide a better approximation of insulation life.
26