Download Integrated Network Interface Card User`s Manual
Transcript
User Supplied Values User Supplied Values Host: For this session, use the IP value from (step 4 above). Device description: This is the name of the virtual device. Auto connect: • • If true (enabled) then queue and device automatically attach. If not true (disabled) the command “tn dest dxprn start/stop” allows individual sessions to start or stop. NOTE: Leave other values at their default descriptions. Example of telnet session commands: store tn dest d8prn host 192.168.168.34 store tn dest d8prn devicedesc palletform store tn dest d8prn autoconnect reset This example creates a device/queue named “palletform” on the AS/400 host with IP 192.168.168.34. The NIC adapter initiates the connection each time it is reset or the printer power is cycled. Using Telnet Commands for TN5250 Command List The following commands for TN5250 are available via a Telnet session with the Network Interface Card (NIC). Store Commands store tn dest <dxprn> host <IPaddress> store tn dest <dxprn> port <portnumber> store tn dest <dxprn> devicedesc <devicename> store tn dest <dxprn> msgqname <msgqname> msgqlib <msgqlib> store tn dest <dxprn> WSCSTname <WSCSTname> WSCSTlib <WSCSTlib> store tn dest <dxprn> from default 185