Download Manual - D-Link

Transcript
Section 3 - Configuration
WDS with AP mode
In WDS with AP mode, the DAP-2690 wirelessly connects multiple networks while still functioning as a wireless AP. After completing the
desired settings, click the Save button to let your changes take effect.
Wireless Band: Select either 2.4 GHz or 5 GHz from the drop-down
menu.
Mode: WDS with AP mode is selected from the dropdown menu.
Network Name Service Set Identifier (SSID) is the name designated
(SSID): for a specific wireless local area network (WLAN).
The SSID’s factory default setting is dlink. The
SSID can be easily changed to connect to an
existing wireless network or to establish a new
wireless network.
SSID Visibility: Enable or Disable SSID visibility. Enabling this
feature broadcasts the SSID across the network,
thus making it visible to all network users.
Auto Channel Enabling this feature automatically selects the channel
Selection: that will provide the best wireless performance. This
feature is not supported in WDS with AP mode.
Channel: All devices on the network must share the same channel. To change the channel, use the drop-down menu to make the
desired selection. (Note: The wireless adapters will automatically scan and match the wireless settings.)
D-Link DAP-2690 User Manual
17