Download ViaLite Classic Satcom User Guide
Transcript
PPM LTD 2011 Lband Rack mounted Lband OEM mounted Lband Rack mounted Fixed High Gain Variable Standard Gain Fixed Standard Gain LRT-L1-6R-00-S1310 LRT-L1-7M-03-S1310 LRT-L3-6R-03-S1310 LRR-L1-6R-06 LRR-L1-7M-04 LRR-L3-6R-03 950-2150 950-2150 950-2150 50 50 75 1:1.5 1:1.5 1:1.5 20 9 9 Fixed Fixed Fixed ±3 dB Fixed Fixed ±1.5 ±1.25 ±1.4 ±0.6 ±0.7 ±0.6 ±0.5 ±0.5 ±0.5 ±0.25 ±0.25 ±0.2 ±3 ±3 ±3 Units Transmitter Receiver Frequency Range Impedance VSWR Link Gain Transmitter Gain Receiver Gain Flatness, Fullband Flatness, Fullband Flatness, 36MHz Flatness, 36MHz Gain Stability over temperature, Link Gain Stability with temperature, Tx Gain Stability with temperature, Rx Gain Stability IMD CNR Nominal input Signal Nominal output Signal P1dBinput P1dBinput IP3input IP3input IP3output MHz Ω (Typ) dB (Nom) a a a dB (Max) dB (Typ) dB (Max) dB (Typ) dB (max) dB/°C (Typ) dB/°C (Typ) dB (Typ) dB (Typ) dB (Typ) dBm dBm dBm (Min) dBm (Typ) dBm (Min) dBm (Typ) dBm (Typ) ahj Noise Figure Noise Figure Noise Figure CNR , 1MHz BW @ -40dB IMD CNR , 1MHz BW @ -40dB IMD SFDR Maximum Input Power Power Tx Power Rx Power Tx Power Rx RF connector dB (Max) dB (Typ) dB (Typ) dB (Typ) dB (Typ) dB/Hz? (Typ) dBm (Min) W (Max) W (Max) W (Typ) W (Typ) ak Optical Wavelength Laser Type Optical Power Output Optical Connector nm de ahj aj aj a a a c b ak ak ak ak ck ak ck a c b 0.09 0.05 0.25 @ 24 hrs -66 62 -20 -20 -12 -8 0 4 14 0.09 0.05 0.25 @ 24 hrs -62 56 -20 -20 -4 0 7 12 11 0.09 0.05 0.25 @ 24 hrs -60 58 -20 -20 -5 -1 7 11 10 20 15 22 83 77 109 15 3.2 2.7 2.9 2.3 50Ω SMA 26 20 27 86 79 110 15 2.9 2.3 2.5 2.1 50Ω SMA 24 19 26 85 79 109 15 3.2 2.6 2.9 2.3 75Ω BNC 1310 ± 20 1310 ± 20 1310 ± 20 DFB DFB DFB 4.5 4.5 4.5 FC/APC E2000/APC FC/APC FC/APC: Suhner FCPC-Z/M-A601 narrow keywidth: >60dB return loss E2000/APC: Suhner FLSH-2000-A608: >60dB return loss Use with other types may compromise system performance. f dBm (Typ) g Power LED TX status LED RX status LED GREEN Indicates DC power is applied to the module GREEN: Transmitter laser functioning, RED: Transmitter laser degraded GREEN: Received light level above threshold RED: Received light level below threshold (factory set to 20dB optical) Open drain alarm: OPEN: okay, CURRENT SINK: Laser Degraded Open drain alarm: OPEN: okay, CURRENT SINK: RLL below threshold Forward current monitor, measures laser drive current, VIFL = 68 x Ifwd Analogue Received Light Level (RLL) monitor. VOLTAGE = 7.75V nominal for a gain of +9dB and reduces by 0.25V per dB of loss in the optical path. TX Alarm output RX Alarm output TX monitor output (OEM only) RX monitor output Operating temperature range Storage temperature range -10°C to +50°C -40°C to +70°C a b c d e f g h j k -10°C to +50°C -40°C to +70°C -10°C to +50°C -40°C to +70°C nominal input power @ 0dB optical loss nominal input power @ 1dB optical loss nominal output power @ 5dB optical loss 1550nm options available CWDM options available DFB = Distributed feedback laser, FP = Fabry-Perot laser Connector options FC/APC, E2000 available Variable gain units flatness is quoted at 0dB gain offset Gain variance across control range less than double that at 0dB Measured at 1.2GHz Unless stated all test quotes @ 25°C after 15 minutes warm up 16