Download Manual

Transcript
Parameter page 3
The displayed value for the nominal voltage is:
0 In a 4-conductor grid = 230V conductor-earth voltage
0 In a 3-conductor grid = 100V conductor-conductor voltage, multiplied by the conversion
factor
The % value is used to set the reference voltage at a different value to the nominal voltage.
Example 1: 20,000V * 105% = Reference voltage of 21,000V. This is the reference value for all
trigger thresholds as well as Power Quality events.
Example 2: 500V grid (conductor-conductor) 230V * 125% = 287.5V (conductor-earth)
Parameter page 4
Rated current
All trigger thresholds for the current refer to the set nominal current. The nominal current for
the system should be entered here.
Reference channel defines the measuring channel for frequency measurements and grid synchronisation.
Operation of the PQI-DA smart
LEREF "Verzeichnis Ueberschrift" \* MERGEFORMAT Index
Page 37