Download User Manual
Transcript
User Manual V3.2 7.2.6. Update Flash It’s used for updating invertors’ Firmware. After putting invertor’s ROM documents to related catalogue, users can update the Firmware by clicking the button. 7.3 State Information State Wait Display State information Waiting Initialization & waiting Connect Sec. Connect Normal Normal SPI Failure:Communic ation Fails between M-S Normal state SPI Failure:Communication Fails between M-S EEPROM R/W Fail EEPROM R/W Fail Fault Relay-Check Fail Relay-Check Fail DC Injection High DC Injection High The result of Auto Test Function is fail The result of Auto Test Function is fail DC bus is too high DC bus is too high The voltage reference inside is abnormal The voltage reference inside is abnormal AC HCT Failure AC HCT Failure GFCI Device Failure GFCI Device Failure Device fault Device fault M-S Version Unmatched M-S Version Unmatched Fac Failure:Fac Out of Range Fac Failure:Fac Out of Range 43