Download AW5300 manual

Transcript
AW5300 Wireless Access Point
Chapter 2 Getting Started
Table 2-1 Factory Default Settings
Parameter
Overview
Operation mode
Wireless
Basic: SSID
Basic: Channel
Basic: SSID Broadcast
Basic: Wireless Mode
Basic: Fast Handoff Mode
Security settings: Authentication Mode
Security settings: Encryption Type
WDS settings: Encryption Type†
WDS settings: Dynamic Mode†
WDS settings: Key†
WDS settings: WDS List†
Advanced Settings: Country Region
Advanced Settings: Country Code
Advanced Settings: Transmit Rate
Advanced Settings: Basic Rate
Advanced Settings: Beacon Period
Advanced Settings: DTIM Period
Advanced Settings: Tx Power
Advanced Settings: Fragmentation Threshold
Advanced Settings: RTS Threshold
Network Settings
LAN: DHCP (Obtain an IP Address Automatically)
LAN: IP Address
LAN: Subnet Mask
LAN: Default Gateway
LAN: Preferred DNS
LAN: Alternate DNS
WLAN: IP Address (Only used in Regular AP Gateway mode)
WLAN: Subnet Mask (Only used in Regular AP Gateway mode)
WDS: DHCP (Obtain an IP Address Automatically)
WDS: IP
WDS: Subnet Mask
WDS: Gateway
WDS: Default Gateway
SNMP Settings
System Contact
System Name
System Location
SNMP Service
Read Community
Write Community
SNMP Trap Server
E-mail Settings
Sender
Receiver
SMTP Server
Authentication
User name
Password
Default Values
Regular AP
AW5300
Auto
Enable
802.11b/g MIXED
Disable
Open
NONE
NONE
Disable
(BLANK)
(Not set)
US (Channel 1-11)
TH(Thailand)
Auto
15 Mbps
100 milliseconds
3 milliseconds
100%
2346 bytes
2347 bytes
Disable
10.0.50.200
255.0.0.0
10.0.50.1
168.95.1.1
(Blank)
192.168.0.1
255.255.255.0
Enable
(Blank)
(Blank)
(Blank)
WDS1 = Selected;
WDS2-4 = Not selected
Contact
Name
Location
Disable
public
private
0.0.0.0
(Blank)
(Blank)
(Blank)
Disable
(Blank)
(Blank)
Copyright © 2008 Atop Technologies, Inc.
All rights reserved
2-8