Download View/Open - Calhoun: The NPS

Transcript
time) have been corrected to provide effects on
target.
3.2.2.1.3
Suppression:
To quickly bring fire on a
target that is not active, the observer announces
SUPPRESS (followed by the target identification).
Suppression (S) missions are normally fired on
preplanned targets, and a duration is associated with
the call for fire.
3.2.2.1.4
Immediate
Suppression
or
Immediate
Smoke: When engaging a planned target or target
of opportunity that has taken friendly maneuver or
aerial elements under fire, the observer announces
IMMEDIATE SUPPRESSION or IMMEDIATE
SMOKE (followed by the target location). Though
the grid method of target location is the most
common, any method of target location may be
used in firing an immediate suppression or
immediate smoke mission.
3.2.2.2 Size of Element to Fire for Effect:
The observer may
request the size of the unit to fire for effect; for example,
BATTALION. Usually, he does this by announcing the last
letter in the battalion FDC's call sign. For example, T6H24
is announced H. The observer should never refer to a
battery or other unit in the clear. He should refer to it by
call sign. If the observer says nothing about the size of the
element to fire, the battalion FDC makes that decision. It is
based on the target attack guidance received and the
graphical munitions effectiveness table (GMET) or joint
munitions effectiveness manual (JMEM) solution.
3.2.2.3 Select: Method of Target Location:
22