Download LinMot-Talk 6

Transcript
LinMot-Talk 6
1.3
PnP (Plug and Play)
The drive families A1100, C1100, C1200, E1200 and E1400 support the so called „Plug
and Play“ functionality. When a motor is connected to the drive, the motor will be
automatically detected and the parameters will be set accordingly. The drive then can
control the motor without any further configuration procedure. When starting the motor
wizard, the connected motor is already selected and all the further configuration, such as
exact slider, moving mass, friction etc can be set up.
All components (drives and motors) which support the plug and play functionality are
marked on the type label with “PnP”.
The drive startup sequence is the following:
Drive PnP startup sequence.
*) All parameters, which are set by the previous PnP motor, will be set to default values
prior to load the new parameters.