Download Workbench User Manual

Transcript
Workbench
www.snellgroup.com
Configuration
5.7.8 UMD Engine Device
The UMD Engine provides a mechanism to automatically update the text displayed on the
UMDs with the destinations source name in the tie-line tally table.
To connect to the Tielines engines and the UMD drivers, configure the UMD Engine to include
at least one Tielines engine (see section 5.7.6) and one UMD driver (see section 5.7.7).
Fig 81. UMD Engine Editor
To add a new UMD driver:
1.
Click the Add UMD Driver button, and a new driver is added to the list. Select the
Driver from the drop-down list.
2.
Click the Add Tie-line Driver button, and select the Tie-line from the drop-down list.
3.
Click the Add a new field button, and a new entry is added to the list. Configure the
engine as required.
5.8 Controller Configuration Editors
The Generic tab has three buttons:
•
Edit Controller - See “Generic Editor” on page 94.
•
Edit Controller Online - See “Online Editor” on page 95.
•
Checksum - See “Checksum” on page 95.
Fig 82. Generic Controller Configuration
Issue 1 Rev 4
Page 93
© 2013 Snell Limited