Download Global Value

Transcript
B.8.2.17 |GVSampleDataSC_DilutionFactorsFilePath|
This parameter specifies the full path to a text file that defines the
valid dilution schemes that are used to populate the Dilution
Schemes list. This list is accessed by selecting the “Lookup” button
next to the Dilution Factor field. When an item in this list is selected
and the dialog box is closed, the associated dilution value is set in
the Dilution Factor field. This process can simplify the calculation of
multiple dilutions when the typical dilution fractions are pre-defined.
Example:
Figure B.8.2.17 Dilution Schemes
|GVSampleDataSC_DilutionFactorsFilePath|=
|CONFIGDIR|GVSampleDataSC_DilutionFactors.txt
The file contains comma-delimited parameters as follows: (Dilution Scheme, Dilution Factor)
Data starts after the asterisk (*) line.
**************************************************************************************
1-10, 10
1-100, 100
1-10 plus 1-10, 100
Any text can precede the asterisk (*) line, but the asterisk line must exist as it signals the
start of the parameters to be read.
B.8.2.18 |GVSampleDataSC_QAPeakJobTemplateFilePath|
This parameter specifies the full path to a Job Template file which is used to create the
automation Jobs for the “QA Peaks” Analysis Method as described in Section B.8.1.1 Step
#2. At a minimum this Job Templates must include the following functions:
1)
2)
3)
4)
5)
6)
7)
8)
9)
Change Sample (Multiple Samples mode only. Changer type dictates the specific commands.)
Set Sample Description
Copy the Default SDF file to the sample specific SDF file path
Update the sample specific SDF file using options set in the QA Peak Configuration File (See
Section B.8.2.20)
Load the SDF file into GammaVision
Load the calibration and library files
Save, Analyze, and load QA data into Global Value.
Recalibrate Energy/FWHM, and load AS LEFT QA data (as applicable)
Call the Job File for the Next sample in the queue
Refer to Section B.31 and the example Job Templates for more detail related to the file
content.
Example:
|GVSampleDataSC_QAPeakJobTemplateFilePath|=|SCQAPeak|
where |SCQAPeak| is defined in the Quick Start Configuration file. (See Section A.1 for
more details regarding the Quick Start configuration files.)
Page B42 of B77