Download User`s Manual
Transcript
Optional Components for SCORBOT-ER VII System Item Cat. # Notes DC Motor Kits: Motor with 5.9:1gear ratio Motor with 19.5:1 gear ratio Motor with 65.5:1 gear ratio Motor with 127:1 gear ratio 1210 1212 1211 1206 Rotary Table (black) 1005 Proximity Sensor for Rotary Table 1209 Conveyor Belt (gray) 1006 Proximity Sensor for Conveyor 1203 Experiment Table 1201 48" Linear Slidebase 72" Linear Slidebase 1001 1002 12VDC 1.0M Linear Slidebase 1.5M Linear Slidebase 1008 1007 24VDC Gripper attachment for round/square parts 616 For #613 DC Servo Gripper Pneumatic Gripper 613 614 Vacuum Gripper (1 suction cup) Vacuum Gripper (3 suction cups) 601 602 Air Brush Paint Gun 603 Syringe Dispenser 604 Utilities Control Box 1204 Includes solenoid value, air regulator, fittings, power supply. Air Supply Adapter Kit 1208 Includes 2 quick connectors and air hose. I/O Interface Box for Controller-A 1215 12VDC, Includes encoder and connector cable. 12VDC, ∅350mm plate 12VDC, 20-slot encoder Requires #1204 and #1208 Safety Precautions This manual provides complete details for proper installation and operation of the SCORBOT-ER VII and Controller-A. Do not install or operate the robot or controller until you have thoroughly studied this User’s Manual. Be sure you fheed the safety guidelines for both the robot and the controller. Robot 1-4 1. Make sure the robot base is properly and securely bolted in place. 2. Make sure the robot arm has ample space in which to operate freely. SCORBOT-ER VII User’s Manual 9602