Download to the PDF file.

Transcript
4-4
4.3.2
MAINTENANCE AND TROUBLESHOOTING
Model 1000A
Routine Maintenance Procedures
• Complete the maintenance checklist bi-monthly. Place the sales order
number, date, and time on the form and file it. This gives you a basis
for comparison in the future if you need it.
• Save a Chromatogram of the operating Model 1000A on the PC with
the MON 2000 software. Print Configuration, Calibration, and Raw
Data reports and file them with the MON 2000.
• Check the printer paper (if used) to ensure that a sufficient supply of
paper remains. Check carrier and calibration gas supplies.
4.3.3
Contact Service
Measurement Services offers maintenance service programs that are
tailored to fit specific requirements. Contracts for service and repair can
be arranged by contacting Measurement Services at the address or
telephone number on the Customer Repair Report at the back of this
manual.
4.4
ACCESS TO GC EQUIPMENT ELEMENTS
4.4.1
Electrical/Electronic Components
WARNING: EQUIPMENT DAMAGE OR PERSONAL INJURY
The electronics enclosure should not be opened when the unit is
exposed to an explosive environment. If access to the eletronics
enclosure is required, precautions must be taken to ensure that an
explosive environment is not present. Failure to do so may result in
injury or death to personnel or cause damage to the equipment.
The Model 1000A electrical/electronic components are located in the
electronics enclosure. All of the electrical/electronic components are fully
accessible from the front of the GC.
Routine Maintenance Procedures
JUNE 2008