Download USER`S MANUAL

Transcript
2-1 Switching the Power On and Off
Switching the Power On and Off
This machine has a main power switch and a sub power switch. Switch on both to use the machine.
Whenever printing is finished, switch off the sub power. You also flip down the loading lever to the rear of the machine.
Leave the main power switch ➀ on at all times, never switching it off. Leaving it on activates the alarm feature.
☞ P. 64, "Alarm Feature"
WARNING
When printing is not being performed, remove any loaded media or switch off the
sub power.
The continued application of heat at a single location may cause the release of toxic gases
from the media or pose a fire hazard.
Main power switch
Sub power switch
Be sure to leave
switched on at
all times.
Back of the printer
Turn this switch on after
closing the front cover.
To turn it off, hold down
the switch for one
second or longer.
Front of the printer
Flip the loading lever down
to the rear when not in use.
Important Note on Switching Off the Power
Never switch off the main power or unplug the power cord
suddenly while operation is in progress. Doing so may damage the print heads. Be sure to first switch off the sub power.
If the main power is accidentally switched off, immediately
turn the power back on.
26
Chapter 2 Basic Operation