Download PDF
Transcript
English (GB) English (GB) Functional profile and user manual 1. Symbols used in this document Original functional profile and user manual. CONTENTS Warning Page 1. Symbols used in this document 2 2. 2.1 2.2 2.3 2.4 2.5 Introduction About this functional profile PROFIBUS DP-V0 PROFIBUS DP-V1 Assumptions Definitions and abbreviations 3 3 3 3 3 3 3. 3.1 3.2 3.3 System description PROFIBUS/PROFINET PROFIBUS DP (CIM 150) PROFINET IO (CIM 500) 4 4 4 4 4. 4.1 4.2 4.3 Specifications CIM module general data CIM 150 PROFIBUS DP CIM 500 PROFINET IO 5 5 5 5 5. 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 PROFIBUS DP, CIM 150 setup PROFIBUS bus topology CIM 150 PROFIBUS module Connecting the PROFIBUS Setting the PROFIBUS address Termination resistors Status LEDs Communication watchdog Reaction to PLC "Stop button" 6 6 6 6 7 7 7 7 7 6. 6.1 6.2 6.3 6.4 6.5 6.6 PROFINET IO, CIM 500 setup Connecting the Ethernet cable Setting the Industrial Ethernet protocol Setting up the IP addresses Establish connection to the Webserver Status LEDs DATA and LINK LEDs 8 8 8 8 9 9 9 7. 7.1 7.2 7.3 7.4 7.5 7.6 Detailed description of data modules Data types Control module (controlModule, module 2) Status module (StatusModule, module 1) Illustration of closed-loop control Relay control module (RelayControl, module 3) Setting of the maximum flow limit (SetMaxFlowLimit, module 44) 7.7 Setting of the real-time clock (SetRealTimeClock, module 45) 7.8 Alarms and warnings 7.9 Measurement data modules 7.10 Sensor-dependent measurements 7.11 Device identification (DeviceIdentification, module 41) 14 15 16 19 20 8. 8.1 8.2 Product simulation CIM 150 Product Simulation CIM 500 Product Simulation 21 21 21 9. 9.1 9.2 Fault finding CIM/CIU 150 CIM/CIU 500 22 22 23 10. Grundfos alarm and warning codes 24 11. PROFIBUS address 27 2 10 10 10 12 14 14 14 If these safety instructions are not observed, it may result in personal injury. Caution If these safety instructions are not observed, it may result in malfunction or damage to the equipment. Note Notes or instructions that make the job easier and ensure safe operation.