Download AE BUS (HOST) PORT
Transcript
Pinnacle™ 20 kW Table 4-18. Host Port (AE Bus) Commands (Continued) Command 179 request active recipe step, ramp/ run status, and ramp/run time remaining 180 request recipe steps Description Requests the active recipe step number, the ramp/run status, and the ramp/run time remaining. Number of Transmit Data Bytes Number of Response Data Bytes 0 4 0 1 1 2 The returning packet contains 4 data bytes (32bit value) indicating the following: • First byte = Active recipe step number • Second byte = Ramp/run status • (1 = ramp, 2 = run) • Third and fourth bytes = Ramp/run time remaining in seconds. Two decimal places are implied. For example, a value of 5 would indicate 0.05s or 50 ms. Note: If the unit has the 100 ms ramp feature, one decimal is implied (5 = .5 s). Requests the number of recipe steps that you have set with command 19; the returning packet contains 1 data byte (8-bit value) indicating the number of steps. Note: Recall that a value of 0 sent with command 19 disables the ramping recipe feature. 181 request recipe step ramp time Requests the amount of ramping time you have set for a specific ramping recipe step (set with command 21). Send 1 data byte (8-bit value) indicating the recipe step. The returning packet contains 2 data bytes (16bit value) indicating the time in seconds. Two decimal places are implied. For example, a value of 5 would indicate 0.05 s. Note: If the unit has the 100 ms ramp feature, one decimal is implied (5 = .5 s). 5702266-E I/O Communication and Control 4-101