Download Manual

Transcript
3
DEVICE MANAGEMENT
3.1 Adding a Device
Figure 16: Manual device activation
The alternative to the automatic detection of the connected devices is the possibility of adding the devices
manually (Figure 16) in the menu Management / Devices / Add Manually (for example if the device is in a
different network that the IPCorder).
Similarly to detecting the devices automatically, there are input boxes for the Device Name, possibility to
automatically assign IP address (only for the devices in local network) and security settings, which serve the
same purpose.
Further it is necessary to know the IP address of the device (or – for cameras in a different network – the
IP address of the gateway to this network) and to choose what type of device is being added. In the section
Port numbers it is possible to redefine the ports IPCorder should use for the communication with the device.
This can be usefull if the camera’s services run on non-standard ports or if the device is located in a different
network – in such case you should fill in the port numbers on the outer side of the router at which the individual
camera’s services are available. The part View account menu has the same option as in the case of Automatic
adding od devices.
It is also possible to add multiple devices at once. Click the Add Next button to extend the form for another
device.
Confirm the inserted values by clicking the Activate button.
20