Download EVO User Manual V5.0
Transcript
The In Line Panel (ILP2) November 13, 2014 Step 2 Touch a control on any channel. This copies the whole channel to a clipboard. Keep holding down the Enab / Copy button. Step 3 Choose which parameters you want to paste by toggling their buttons on the right side of the ILP. You may choose any number of buttons, and they will flash. Hold down BLUE if you want to select parameters whose buttons work with the BLUE key, like Filter. If you want to paste the whole channel, press the Chan button on the left side of the ILP. Step 4 Touch controls on any number of destination channels. The system will paste your chosen parameters into each channel as you touch its control. Step 5 Release the Enab / Copy button. Strip Buttons The Strip buttons control which “pages” of controls are shown in Strip Mode and Wide Mode. Pressing a strip button once displays the first page of that parameter’s controls on all strips. Some parameters have more than one page, such as EQ and Aux. Press the Strip button again to access the extra pages. Strip buttons can be used in momentary mode: Hold down a Strip button, make a change to a parameter, then release the Strip button to return to the previously displayed page. BLUE Strip functions are those displayed below, like this: Normal function– simply press to access Blue function – to access, hold down the BLUE button and press The BLUE button The BLUE button is a “modifier” key, like Shift and Ctrl on a QWERTY keyboard. Holding it down affects the behaviour of other buttons. Here are some of the things the BLUE button does in the ILP: Accesses the lower of each pair of functions on the Mode buttons and Strip buttons. Sets default values on some controls. For example, hold down BLUE and: o Touch any fader to set its value to 0 dB o Touch any aux level knob to set its value to 0 dB o Touch any LR Pan control to set it to Center o Touch any FB Pan control to set it to Front Strip Details The available pages are as follows: Pan Pan L-R, Pan F-B, Spread, Divergence, Rotation, Boom Path Trim, Phase, Record Level, Arm, Insert, Direct Output Page 252