Download M450_01 TSC
Transcript
SECS/GEM SPOOL FULL The Spool area is full. The Equipment can be configured to overwrite old spool messages or to discard new messages. This depends on the Equipment Constant OverwriteSpool. SPOOL UNLOAD: The Equipment handles the transmission of spooled messages to the Host. This state has two sub states: SPOOL OUTPUT and NO SPOOL OUTPUT. NO SPOOL OUTPUT No messages are removed from the Spool area. SPOOL OUTPUT Removal of messages from the Spool area. This state has two sub-states: TRANSMIT SPOOL and PURGE SPOOL TRANSMIT SPOOL The Host has requested the transmission of the spooled messages. The Equipments sends the messages. PURGE SPOOL The Host has requested to purge the spooled messages. The Equipment removes all messages from the spool area and does not send them to the Host. 11.6.18.2 State Transitions The Finite State Diagram in Figure 11-14 shows the different state transitions of the spooling. These state transitions are described in Table 11-6. FIGURE 11-14: SPOOLING STATE TRANSITIONS TSC-II USER MANUAL 11-26