Download ARLACON McBasic 3.2 programming environment reference manual

Transcript
ARLACON McBasic
programming environment
reference manual
MCBASMAE.DOC
126
12. I/O CONNECTIONS
The digital and analog inputs and outputs in Arlacon control systems are available for programming
with dedicated McBasic commands and functions.
Inputs and outputs exist in the control system both in various i/o -modules and for example in
motion control connection modules. These modules can reside in an MC400 rack or connected to a
McWay distributed i/o loop.
12.1 I/O CONFIGURATION
Before a McWay loop can be used, it must be initialised using the McBasic WAYMOD$ command.