Download ServoOne
Transcript
ServoOne Operation Manual 3.14.1Motor connection of LSH/LST-motors 3.14.2Prefabricated motor cable Note: Please use the prefabricated motor cable KM3-KS-005 to connect servo motors of series LSH xxx and LST xxx. Servo controllers size BG1 to BG4 can be used for these motors. Front Ordering key KM3 OSD03 GND X12 1 2 Control of motor brake Motor cable KM3-KS-005 U V W L+ ~ Minimum bending radius: 24 V DC + Brake (+) Boden Fig. 3.13 Connection of motor 005 008 010 015 020 KM3.KS xxx DC-Anschluss RB 002 003 Technical data Motor 3 Bremswiderstand 005 Ordering key For motors with pluggable power connection L- KS Chain trailing ability Design Length 2 m Length 3 m Length 5 m Length 8 m Length 10 m Length 15 m Length 20 m Cable length - X13 - Prefabricated motor cable + X5 28 Temperature range: Brake (-) up to 16 A IN for stationary routing 60 mm for flexible applications 120 mm for stationary routing -50 ... +90 °C for flexible applications -50 ... +90 °C Cable diameter approx. Ø 12 mm Material of oversheath PUR Table 3.13 Technical data motor cable Note: Strands 5 and 6 (PTC) are only required for motors with optical sensors (G12, G13, G6, G6M). On the LSH/LST xxx motors with resolver PTC-monitoring is accomplished through the resolver line.