Download [:SOURce]:BB:GSM[:FRAMe]

Transcript
GSM/EDGE, EDGE Evolution
GSM/EDGE User Interface
Burst Editor
When a frame/slot is saved, the changed extended training sequence is also saved.
Remote command:
​[:​SOURce<hw>]:​BB:​GSM[:​FRAMe<di>]:​SLOT<st0>[:​SUBChannel<us>][:​
USER<ch>]:​ETSC:​USER​ on page 106
Training Sequence Sync ← Burst Fields
Selects Training Sequence Sync for the "Access" burst.
There is a choice of three predefined, 41-bit training sequences sync. Additionally userdefined training sequence sync can be defined in the "User Sync" field and is then also
available for selection.
Remote command:
​[:​SOURce<hw>]:​BB:​GSM[:​FRAMe<di>]:​SLOT<st0>[:​SUBChannel<us>][:​
USER<ch>]:​SYNC:​SELect​ on page 106
Sync Pattern ← Burst Fields
Edits the Training Sequence Sync for the Access burst.
When a sequence has been changed, the "Training Sequence Sync" field also displays
"User" as a possible choice.
When a frame/slot is saved the amended training sequence sync is also saved.
Remote command:
​[:​SOURce<hw>]:​BB:​GSM[:​FRAMe<di>]:​SLOT<st0>[:​SUBChannel<us>][:​
USER<ch>]:​SYNC:​USER​ on page 107
Fixed ← Burst Fields
Selects the data content of the Fixed field in the Frequency Correction burst. There is a
choice of two fixed, 142-bit data contents prescribed by the standard. The "User" data
content can also be selected. This pattern can be edited in the Fixed Pattern field and
must likewise be 142 bits long.
Remote command:
​[:​SOURce<hw>]:​BB:​GSM[:​FRAMe<di>]:​SLOT<st0>[:​SUBChannel<us>][:​
USER<ch>]:​FCORrection:​FIXed​ on page 107
Fixed Pattern ← Burst Fields
Displays the data content of the Fixed field in the Frequency Correction burst when "Fixed
Standard" or "Compact" is selected.
Enter the data content of the Fixed field in the Frequency Correction burst when "Fixed
User" is selected. The pattern is 142 bits long.
Remote command:
​[:​SOURce<hw>]:​BB:​GSM[:​FRAMe<di>]:​SLOT<st0>[:​SUBChannel<us>][:​
USER<ch>]:​FCORrection:​FIXed:​PATTern​ on page 107
User Manual 1175.6684.02 ─ 02
54