Download User`s Manual Version 5.2
Transcript
Mediant 1000 5.4.5.1.1 Replacing the Main Corporate Logo with an Image File You can replace the logo in the Web interface's title bar using either the Embedded Web Server or the ini file. ¾ To replace the default logo with your own corporate image via the Embedded Web Server, take these 7 steps: 1. Access the gateway's Embedded Web Server (refer to 'Accessing the Embedded Web Server' on page 60). 2. In the URL field, append the case-sensitive suffix ‘AdminPage’ to the IP address (e.g., http://10.1.229.17/AdminPage). 3. Click Image Load to Device; the Image Download screen is displayed, as shown in the figure below. Figure 5-7: Image Download Screen 4. Click the Browse button in the 'Send Logo Image File from your computer to the Device' box. Navigate to the folder that contains the logo image file you want to load. 5. Click the Send File button; the file is sent to the device. When loading is complete, the screen is automatically refreshed and the new logo image is displayed. 6. If you want to modify the width of the logo (the default width is 339 pixels), in the 'Logo Width' field, enter the new width (in pixels) and then click the Set Logo Width button. 7. To save the image to flash memory, refer to 'Saving Configuration' on page 278. The new logo appears on all Embedded Web Server interface pages. SIP User's Manual 66 Document #: LTRT-83302
Related documents
Audiocodes Mediant 600
SIP User`s Manual
User`s Manual
User's Manual Version 5.0
AIRMATE-USB MANUAL-1.indd - D&R Broadcast Mixing Consoles
User`s Manual Version 5.0
Audiocodes Mediant 600 and 1000 SIP User Guide
Audiocodes MediaPack 114
Release Notes - NFS Professional Services
DMX - O`Boyle SRL
User`s Manual Version 5.0
User`s Manual