Download TRACKER Remote Diagnostic Analyzer

Transcript
Functions
Table 5–2. System Configuration, Editable Parameters (Cont)
Parameter
Description
Log / Capture Files
Flush Interval
The frequency with which to purge old files. This value is
in hours and is an offset from the flush time. Example: a
flush interval of 4 hours and a flush time of 0400 results
in the files being flushed at 8:00, 12:00, 16:00, 20:00 and
24:00 (midnight).
Include Device Name
Add a Device Name field to the event data in log reports,
whether or not the report includes data from multiple
devices. Default (unchecked) is to add a Device Name
field only if the report is for multiple devices.
No Initial Snapshot
Do not include the initial snapshot of all variable values in
log reports. Default (unchecked) is to include an initial
snapshot.
Select the Devices button to bring up the Select Device Window to edit the configuration
information of any defined device.
NOTE
Only devices available before the Edit System Configuration Window is
opened are available when the Devices button is selected. If the number
of devices entry is modified, that change does not take affect until after the
system configuration information is saved.
Expected result: If the Save button is selected, changes to the system configuration
information are saved. If the Cancel button is selected, any changes made are
discarded. If the Save option is selected after the changes are saved, TRACKER
restarts with the new settings.
P2307, Rev. Oct/07
5–11
Alstom Signaling Inc.