Download general information hardware installation user
Transcript
User Interface Commands Detailed Command Descriptions 3.6.32 QUIT—Exit ADS Program QUIT [E(enable)/D(disable)] The QUIT command passes control back to the operating system and closes all logging files, assignment files, and macro files currently open. Use the SYSTEM command to exit the ADS program temporarily. AR Y QUIT enable and QUIT disable control the action taken by the ADS if an error occurs during the execution of a macro command. QUIT enable specifies that the macro command is aborted and the ADS quits immediately with a non-zero exit status. QUIT disable specifies that the ADS does not exit. IN Example 3-40 QUIT Command Examples quit Close all currently open files and return to the Operating System. Target DSP may be left running until the program is re-entered. quit e PR EL IM Specify that errors in a macro command will cause the ADS to exit with a non-zero status. The ADS does not exit when this command is issued. MOTOROLA DSPADSUM/AD 3-61
Related documents
Debugger User`s Manual
Reference Manual
Motorola Command One User`s manual
MOTOROLA DSP SIMULATOR REFERENCE MANUAL
Suite56 DSP Simulator User`s Manual
Suite56 DSP Simulator User`s Manual
User Guide - v3.6r1 DSP56xxx Toolchain C Compiler
motorola digital signal processing development software
Application Systems ADX-64 Specifications
Table of Contents (Continued)
Novell SecureLogin 6.1 Support Pack 1 Readme
S.T.A.G. Self-Tuning Acoustic Guitar