Download TABS

Transcript

Mean radiant temperature and Operative Temperature: the first temperature is
combined with the Air temperature in order to have the Operative temperature in
the analyzed room. See Appendix A for further details;

Circuit heat: is the value of the used cooling power hour per hour during the
period. It is in specific or absolute power depending on the option selected;

Floor, Ceiling and Internal wall surface heats: are the values of the heat transfer
between the pipes and the thermal node Floor, Ceiling and Internal Wall,
respectively;

Total radiant and convective gains: are the fractions of room radiant and
convective loads acting on the pipes.
As last available option, is also possible to see only the report file by clicking on Create
Report, it will open only the output file of the simulation as excel file. Obviously, the
software folders contain all the project parameters divided in Input files, Output files and
Project Files. These files can be opened with Notepad or a similar program.
59