Download USER`S Manual

Transcript
⑦ Click 「Continue Anyway」.
If installing device drive is succeed, model name
is shown under the device manager.
⑧ Click 「Browse」and「OK」.
Open the folder 「drivers」 in the CD-ROM,
and click 「OK」.
Example: Artray ARTCAM-036MI
START ー> Controll Panel ー> System ー>
Hardware ー> Device manager ー> USB controller
* You have to install a device driver whenever you switch an USB port
even if you use a same PC.
*This process might be not shown.
⑨ Click 「Finish」.
Then, installing device drive is done.
5