Download Optimized CANopen M238 (System User Guide

Transcript
Save the
Project
7
The HMI used is now marked
as active.
1
To save the project and change
the name select:
File->Save Project As…
2
Enter the File name and click
on Save.
Note:
By default the project is saved
under My Documents.
Build
Application
1
To build the application click on
Build → Build All.
2
After the build you are notified
in the Messages field as to
whether the build was
successful or not.
If the build was not successful
there will be a list of detected
compilation errors that you
must remedy in the Messages
field.
Download
the controller
and HMI
projects
1
Note:
If it is the first time you are connecting to the HMI you have to first download the
latest runtime version to the HMI using Vijeo Designer.
This first download is described in the following steps.
If this is not the first download go directly to step 7.
Optimized CANopen M238
Schneider Electric
68