Download Point 510 Technical Reference Guide
Transcript
Table 2-9 PENSET51 Command Line Parameters (Continued) 2-22 Option Setting Function Description SDY N 1 2 4 6 8 12 16 20 Off (No standby timeout set.) 1 minute 2 minutes 4 minutes 6 minutes 8 minutes 12 minutes 16 minutes 20 minutes Standby Mode Timeout Note: The power savings mode BIOS option (PSM) must be set to Customize before this option can be changed. SUST N 5 10 15 20 30 40 60 Off (No suspend mode timeout set.) 5 minutes 10 minutes 15 minutes 20 minutes 30 minutes 40 minutes 60 minutes Suspend Mode Timeout Note: The power savings mode BIOS option (PSM) must be set to Customize before this option can be changed. TIME OFF HH:MM:SS Resume on time disabled. Specify resume time in hours, minutes, and seconds. (Note: System uses a 24 hour clock.) Resume On Time/Resume Time Note that this command line option sets two options that appear in menu mode (Resume on Time and Resume Time). PB SR OO Suspend/Resume On/Off Power Button BOOT AC CA C A: then C: C: then A: C: only Boot Sequence POST N Y Disabled Enabled POST Errors PRMPT N Y Disabled Enabled SETUP Prompt SUM N Y Disabled Enabled Summary Screen LOCK A N Y Auto Off On Numlock Configuring the Point 510 Pen Tablet System