Download Final Documentation

Transcript
control will be connected from the PCB to the relays of those items. Each item
that the user wants to control, specified in the MCU coding, will have a specific
output pin and an assigned ASCII character affiliated with it to either turn it on or
off. The BlueTerm application allows the user to send the specific ASCII
character directly to the MCU in order to control the connected device. This
project shows a method in connecting the Android as a controller to multiple
devices. Figure 3.5 provides a block diagram on how Android devices can be
connected to multiple devices or systems that can be controlled within a
household.
Figure 3.5 Block Diagram illustrating Android control over multiple systems
3.2.3
Location Detection
Puppy Pal requires a location detection subsystem in order to keep the dog safe,
if Puppy Pal simply rolled around with no location feedback it could potentially roll
into an unsafe area like a road, or undesirable area, like the pantry. The location
must be capable of working with the control and mechanical subsystems to keep
Puppy Pal within its assigned area of play within normal circumstances, meaning
it is not being forced out by an external force. The location detection subsystem
should also be capable of guiding Puppy Pal to return to its area from any place
that the mechanical subsystem is capable of doing so, after it is carried off
course by an error or external force. The key factors of the location detection
subsystem are accuracy, precision, size, complexity of implementation, additional
hardware, and cost. The location detection subsystem must also be capable of
accurately providing velocity data, or primary data must be accurate and be
19