Download 1.0 Overview

Transcript
2.2 Changing the 'Product firmware' file
The test 'Project Collection' is shipped with an example 'Production firmware' from Sigma
Designs. To program your own 'Product firmware' into the target Z-Wave device, you will need to
change the 'Firmware file' specified in the 'PRODUCTION' project to your own 'Product firmware'
file.
To change the 'Product firmware file'....
1. Open the 'Sigma Project Collection' - see section 2.1 for instructions
2. Highlight the 'PRODUCTION' project by clicking on the project name once
--> see screenshot below....
3. To open the 'PRODUCTION' project
- Click the 'Edit Project' button or double-click the 'PRODUCTION' project name in the list.
--> The 'PRODUCTION' project will now open in 'Project Builder' view.
AN145- In-System Programming (ISP) of Sigma Z-Wave 500 series SOC devices and modules
36