Download User manual

Transcript
Chapter 3: Operating the R100 Series
Using the Menus
The R100 Series menu system is designed for easy setup and configuration of the unit
in or out of the field and supports multiple languages. You can perform most
configuration tasks entirely through the menu without having to connect to a
computer or PDA.
Refer to Appendix C, “Menu Maps” for a complete menu map for the following
options on the Main menu.
•
GPS
•
Differential corrections (menu item will be the selected differential source,
such as SBAS or Autonomous)
•
Configuration Wizard
•
System Setup
The R100 Series front panel contains three soft buttons: Up arrow, Enter, and Down
arrow (see Figure 3-2).
Up arrow - moves to the previous menu item or to the
previous selection within a menu item
Enter - displays a submenu or selects an option within a
menu item
Down arrow - moves to the next menu item or to the
next selection within a menu item
Figure 3-2: Menu buttons
Note: On the R131 the Enter button also functions as the Power switch. See
“Powering the Receiver On/Off” on page 14 for more information.
R100 Series User Guide
16
PN 875-0173-000 Rev F1