Download Medium Voltage Application Guide

Transcript
SWITCHGEAR
Bus Coupler Panel (BCP)
A bus coupler panel connects two adjacent horizontal busbar systems together using a main circuit breaker
(normally a withdrawable type), which is housed in its own compartment of the panel. The horizontal busbar
system of metal-enclosed switchgear is usually situated towards the top of the panel enclosure. In order to
physically connect two adjacent busbar systems together, a bus coupler panel must be used alongside a bus riser
panel.
A main earth switch, current and voltage transformers and low voltage equipment can all be supplied as optional
extras.
AuCom provides a Bus Coupler Panel as part of its L-Series switchgear range. This is rated at 12 kV from
630 A to 2000 A. An IAC classification of 31.5 kA for 1 second is achieved by double skin
compartments, special locking door designs and top-exit arc flaps for pressure release.
Bus Coupler Panel (BCP)
11166.A
Typical Bus Coupler Panel
Front view
Side view
Rear view
1
1
2
3
2
Circuit breaker
Current transformer set
Earth switch
11169.A
3
Page 76
Medium Voltage Application Guide
710-12280-00A