Download User manual

Transcript
Enter the command line and follow the argument list. Be sure to put a
space between the commands. E.g. changing or setting the STP status:
set stp enable
By using a similar command line, all other STP parameters – such as
bridge and port can be modified to your own requirements.
SS11 - Virtual LAN configurations
Enter the command line and follow the argument list. Be sure to put a
space between the commands. E.g. changing or setting VLANs:
show vlan
Enter the command line and follow the argument list. Be sure to put a
space between the commands. E.g. changing or setting the VLANs:
Set vlan
Above example given to configure VLANs
Use a similar command line as above to configure VLAN parameters
such as members, VID, priority, Ingress mode and Egress mode to your
own requirements.
-80-