Download Here - Droplet Technologies

Transcript
1 The Basics
———————————————————————————————————————
1.3 The Three Major Swath Kit Tasks
The Swath Kit can be divided into 3 parts according to the 3 broad tasks which
comprise this next characterization phase of the aircraft set-up.
1.3.1 Trial Detail and Weather Recording
Much spray trial data are lost from the pool of available knowledge about spray
performance because insufficient supplemental information is recorded which
explains the conditions of the trial. Recording of the spraying system settings,
speed and height of the aircraft and conditions of the trial are therefore vital to
explain the results.
The weather must also be monitored during a trial to ensure suitable conditions
exist for the test. The parameters wind speed, wind direction, temperature and
relative humidity are the minimum measurements required to describe the weather.
The easiest way to record measure these data is with portable hand-held
instruments.
Using a Met Kit weather recording station enables the users to visually display
weather data and trends. (The use of the Met Kit is covered in a separate user’s
manual supplied with the Met Kit package.)
1.3.2 Deposit measurement
After an aircraft has made an application over a card-line, the deposit on the cards
must be measured. Deposit can be presented in a number of different ways:
volume of spray per unit area, number of droplets per unit area or percentage of the
surface area covered with spray. Also of interest are the sizes of the droplets. An
image analyzer, a tool which can look at a card and make measurements based on
that image, can provide all these measurements.
1.3.3 Pattern Assessment
When all the cards have been measured, the pattern of the deposit beneath the
aircraft can be assessed. This is typically the main reason why spray trials are
conducted. Solutions to problems in the pattern, such as the elimination of peaks or
valleys and assessment of the effective width of the pattern, can be made at this
stage in conjunction with the weather and trial detail recordings.
1.4 Notes on Data Handling
Understanding the logic of data storage in the Swath Kit for Windows is critical to its
successful use. The Swath Kit program is based on a modular system. These
modules can be set up once and used many times over. For example, you may
consistently work with a Cessna Ag Truck, which has a standard boom with 50
spaces for nozzles, pump type and N-Number. Give this ‘custom aircraft profile’ a
name and it is now a module ready for use again and again for trials.
The information for a trial (a trial is defined as an aircraft spray run) comes from the
following sources:
Aircraft database (installed with the Swath Kit program)
Atomizer database (installed with the Swath Kit program)
Custom Aircraft Profile
Mission Profile
Weather Data (only with Met Kit)
——————————————————————————————————————————————
1-2