Download Dynamix UM

Transcript
2.3 Installation
Note: To avoid possible damage to this router, do not turn on the product before hardware
installation.
ü
Plug the power cord in the power socket.
ü
Plug the console port in console if you want to configure the NTU with VT100 program of NB or
PC.
ü
Plug the E1 cable (Either 75Ω BNC cables or 120Ω cable) / SERIAL cable / Ethernet cable
ü
Plug SHDSL cable
ü
Power on
Model
Interface modes support
E1 interface model
E1 interface
V.35 interface model
V.35 interface
Ethernet interface model Ethernet interface
Multi-interfaces model
E1 interface
V.35 interface
Ethernet interface
E1+V.35 interface
E1+Ethernet interface
Only the Multi-interfaces model can support all five type interfaces.
Dynamix UM-SN Ver.2 User Manual V1.03
16