Download Biopac Student Lab Tutorial

Transcript
38
Biopac Student Lab
The calibration routine will stop automatically.
If your calibration data does not match the sample screen shot
provided, click on Redo Calibration to repeat calibration and erase
the old data.
If your calibration data matches the sample screen shot, click on
Record to begin the first recording segment.
Click on “Suspend” when you have completed the assigned segment
task(s).
• You should click on “Suspend” as soon as possible once you have
completed a segment. This is important because every second
wasted is memory used up for the data recording. The more
memory used, the slower the program will operate, the more disk
space will be used up when the data is saved, and the more
possibility of problems.
• When selected, the Suspend button toggles to “Resume.”
Review Recorded Data
When you Suspend recording between lesson segments, you
can check that you have good data before continuing. You may
want to check your data by zooming in on a segment, taking a
measurement, adding grids, etc. Review your data before
continuing and read ahead to prepare for the next segment.
The Arrow, “I-Beam,” and Zoom tools are inactive (greyed) during
recording but can be used between segments while in the Recording
mode. The Display menu items are also available.
To repeat the last recorded section and erase the old data, click on
Redo.
• The “Redo” feature is very handy and should prevent you from
panicking during the recording. You can redo a recording segment
if something goes wrong or if you realize you have not performed
the proper tasks.
If you are finished with the data recordings, click on Stop.
Click the “Done” button in the Lesson display to generate the closing
options dialog.