Download (Inf) GUI Manager

Transcript
Embedded RAIDWatch User’s Manual
Step 2.
Logical Drive’s information will display including a
unique ID, the RAID level it is composed of, stripe size,
and its operating status.
Enter or select the following parameters for the logical
drive:
Name (Max. Length: 32 characters): Key in a name
for the logical drive if your configuration contains
numerous logical drives.
Write Policy: The caching mode specific to this logical
drive can be changed after you created it.
Assignment: This option allows you to re-assign a
logical drive to a different RAID controller, and hence
relocate the workload. (If mapped to a host LUN, you
need to disassociate the host LUN first) Default is the
“Slot A” controller which is normally the Primary
controller managing the RAID subsystem. In a
subsystem powered by dual-redundant RAID
controllers, you can distribute the workload to the
Secondary, Slot B controller.
Step 3.
At the bottom of the screen, two additional buttons are
available:
Partition: the partitioning procedure will be discussed
later in this chapter.
3-10
Configuring Logical Drives