Download Accelar Network Concepts - Berkeley NOW

Transcript
Layer 2 Networking Concepts
FS2
FS1
T1
S1
T2
T3
S2
T4
S3
T5
S4
9052EA
Figure 3-8.
Client/Server Configuration Example
Ports that belong to the same Multi-Link Trunk operate as follows. All ports in
the MLT must belong to the same spanning tree group if spanning tree is enabled.
Identical Bridge Protocol Data Units (BPDUs) are sent out each port. The MLT
port ID is the ID of the lowest numbered port. If identical BPDUs are received
on all ports, the MLT mode is forwarding. If no BPDU is received on a port or if
BPDU tagging and port tagging do not match, the individual port is taken offline.
Path cost is inversely proportional to the active MLT bandwidth.
205588-A
3-21