Download IXP200 USER MANUAL

Transcript
Section 1 – System Overview
Table 7 – Registration Interface and Registration Readers
The ImproX RS can be used with either the ImproX RRA (for 125 kHz Tags) or
RRM (for Mifare or FeliCa Tags)
Provides two functions :
ImproX RS, USB
Registration
Interface, Metal
Housing
USB to RS485 conversion; and
Allows for the connection of an
ImproX Mifare Remote Reader or 125
kHz Remote Reader for Tag
Registration. (see also ImproX RRA,
RRM).
ImproX RRM,
Registration
Remote Reader,
Mifare
Reads Mifare Tags. It is used with the
ImproX RS.
ImproX RRA,
Registration
Reader Antenna,
125 kHz
Reads 125 kHz Tags. It is used with
the ImproX RS.
MULTI-FUNCTION TERMINALS
Table 8 – Group 3 – Multifunction Terminals
ImproX MfT
ImproX Multifunction Terminal. Can
be used with any one of the Antenna
Readers listed in Table 6, or the
Remote Readers listed in Table 3, as
well as several biometric, magstripe,
barcode remote readers.
This unit is able to function normally
independently of the system if
communications with the system are
interrupted.
© June 2007 Impro Technologies
IXP200 Software User Manual [Issue 12]
Data subject to change without notice
Page
1- 8