Download "user manual"
Transcript
CHENOMX NMR SUITE: USER MANUAL that you have applied to the current spectrum using Processor. You can review this list to find out the parameters used in each layer, like phase angles or reference deconvolution parameters, and step back through past layers to reverse their effects. When you import a processed spectrum, Processor imports phasing, baseline correction and other processing that you may have applied in other processing software. The imported processing effects appear in the Processing History as a layer called Preprocessing. The Preprocessing details, appearing at the bottom of the panel, indicate the format from which you imported the spectrum. The Preprocessing layer is not reversible; you cannot remove it. How do I review and remove processing layers? Menu Location View > Sidebar > Processing History Icon(s) Hotkey(s) 1. Switch to the Processing History view in the Sidebar. 2. Click the name of a processing layer to review its associated parameters; they appear in the Details box below the list. 3. Click the Clear Last button to remove the most recent processing layer. Click the button again to remove the next most recent layer, and so on. Ctrl-Shift-H Cmd-Shift-H Or Click the Clear All button to remove all of the processing layers listed in the Processing History. Tips and Tricks • The Processing History only tracks processing effects, including phasing, baseline correction, reference deconvolution, water deletion and line broadening. Changes to spectrum metadata, such as the spectrum details or CSI and pH settings, do not appear in this panel. • If you have just accidentally removed a layer in the Processing History, you can use the Undo button to restore it. Related Topics • Chapter 2, Handling Samples and Spectra on page 4 • “Importing Spectra” on page 13 • “Legend” on page 17 • “Processing Tools” on page 35 • “Convert Spectra” on page 41 5.4 Processing Tools Processor applies each processing step as a layer, altering the way that you see and interact with your spectrum, but leaving the original raw data untouched. The Processing History records each layer along with its associated parameters, like phase angles, baseline breakpoints and linewidth adjustments. You can review the layers, and even remove them if necessary, restoring your spectrum to earlier state(s). When you import a processed spectrum, processing that you have performed in other software appear in the Processing History as a layer called Preprocessing; the details of the Preprocessing layer indicate the format from which the processed data was imported. The Preprocessing layer is not reversible, and cannot be removed. If you need to work with the 5.4 Processing Tools 35