Download MINIR82- User Manual

Transcript
SETUP > INPUT SETTINGS > INPUT SOURCE
This menu one can select which Input source must be applied to the channels 1-2 and 3-4.
For channels 1-2, the possible sources are:
• AES
• MIC
For channels 3-4, the possible sources are:
• AES
• LINE
SETUP > INPUT SETTINGS > MIC LOW FREQ CUT
When channels 1-2 are configured as MIC, a low-pass filter can be activated for each channel
individually by this menu,.
SETUP > INPUT SETTINGS > LINE IN LEVEL
When channels 3-4 are configured as LINE, the input level can be adapted to properly match with
the A/D Converter, thus the selected value matches the 0dBfs of the A/D.
It presents the following choices:
• +15 dBu
• + 6 dBu
•
0 dBu
• -10 dBu
MINIR82- User Manual / Septembre 2006 / pb
Page 20 of 30