Download SBX_Programming_Guid.. - Forward Telecommunications Services

Transcript
1-7
Chapter 1: System Programming
Admin Programming
PGM 111
DESCRIPTION
PROCEDURE
COMMENTS
Error Tone for
Telephone
Answering Device
If this value is set to ON, and TAD is
used on the SLT port, when the caller
hangs up, a busy tone will be provided
to TAD instead of an error tone.
+ FLEX14 + 1 (ON) +
[HOLD/SAVE]
VALUES 0 = OFF
1 = ON
SLT Flash Drop
If this value is set to ON, CO Call can
be dropped by pressing the [FLASH]
button or Hook Flashing.
+ FLEX15 + 1 (ON) +
[HOLD/SAVE]
VALUES 0 = OFF
1 = ON
Loop LCR Account
Code
If this value is set to ON, the Station
User must enter an Account Code to
use Loop LCR.
+ FLEX16 + 1 (ON) +
[HOLD/SAVE]
VALUES 0 = OFF
1 = ON
VMIB Message Type FIFO/LIFO plays the first recorded
VMIB message, or the latest message,
respectively.
+ FLEX17 + 1 (FIFO) +
[HOLD/SAVE]
VALUES 0 = LIFO
1 = FIFO
Off-net Call Forward If this value is set to ON, off-net call
forward can be used.
+ FLEX18 + 1 (ON) +
[HOLD/SAVE]
VALUES 0 = OFF
1 = ON
Forced Hands Free
If this value is set to ON, the station can
force the called party station to use the
hands-free mode when it is ringing.
+ FLEX19 + 1 (ON) +
[HOLD/SAVE]
VALUES 0 = OFF
1 = ON
CID SLT CAS Gain
(N/A for SBX IP
320)
This feature selects CID SLT CAS
GAIN value.
+ FLEX20 + VALUE +
[HOLD/SAVE]
Reserved
CID SLT FSK Gain
(N/A for SBX IP
320)
This program sets FSK gain for CID
SLT.
+ FLEX21 + VALUE+
[HOLD/SAVE]
Reserved
Caller Voice Over
If this value is set to ON, the station can
make Voice-Over to busy station.
+ FLEX22 + VALUE +
[HOLD/SAVE]
VALUES 0 = OFF
1 = ON
SBX IP 320 Programming Guide