Download EAP200_v1.00_EN_Manu..
Transcript
User’s Manual E A P 2 0 0 E n te r p r is e A c c e s s P o in t E N G L IS H Figure 23 VAP Configuration Page (VAP-1 as shown for example) Select Enable for the VAP field, and click SAVE. Click the Overview tab to return to the previous table to begin the next step. Step 2: Configure Security Settings for your VAP The following instructions will guide the user to set up wireless security with a specific VAP. If only restricted access of certain MAC addresses is desired, skip to the Step3. MAC restriction can be coupled with wireless security to provide extra protection. First, click on the corresponding cell in the column labeled Security Type. This hyperlink will direct the user to the following Security Settings page. Figure 24 Security Settings Page (VAP-1 as shown for example) Select the desired Security Type from the drop-down menu, which includes None, WEP, 802.1X, WPA-PSK, and WPA-RADIUS. 24 Copyr i g h t © 4I P N E T , I N C.