Download WINDY BOY 1200 / 1700 - Installation Guide

Transcript
Electrical Connection
SMA Solar Technology AG
Result
Action
☑ If the conductor is not visible in the hollow • Loosen the clamping bracket with the help
cavity of the clamp, the cable is not in the
of a screwdriver.
correct position.
• Remove the cable and start again from step
1.
4. Push the threaded joint to the thread and screw into place.
☑ The DC plug connectors are now assembled and can be connected to the inverter as described
in section 5.4.4 ”Connecting the Small Wind Turbine System (DC)” (page 28).
26
WB12_17-IEN101131
Installation Guide