Download Micro-EX User Manual

Transcript
Micro-EX User Manual
May 6, 2014
The little green shade will move around the icon that the Installing device driver
software message is pointing to while the driver is being installed (may take
about a minute).
Once completed, the following pop-up message should appear (name of driver
may be different, depending upon which USB to RS232 adapter you are using)
The driver has been successfully downloaded and installed. Make note of both
the Port that you have used for your USB to RS232 Adapter (you should always
use the same Port) and what COM value Windows has assigned for this adapter
(5 in image above).
As a fast check to ensure everything is setup correctly, go into the Device
Manager on Windows and ensure that your adapter has the same settings as
below (COM Port number may be different)
Oh No, Driver did not install correctly.
Sometimes the Window’s gods are having a bad day and they decide to take it
out on you. Don’t Panic. If you check the Ports (COM & LPT) or Other devices list
Micro-EX User Manual
Page 70