Download Model 42i-LS - User Manual
Transcript
C-Link Protocol Commands Datalogging These commands set the long and short records logging period to value in minutes. The example below sets the long record logging period to 15 minutes. Send: Receive: set lrec per 15 set lrec per 15 ok no of lrec no of srec These commands report the number of long and short records stored in the long and short records memory. The example below shows that 50 long records have been stored in the memory. Send: Receive: no of lrec no of lrec 50 recs malloc lrec malloc srec These commands report the currently set memory allocation for long and short records in percent of total memory. Send: Receive: malloc lrec malloc lrec 10% set malloc lrec value set malloc srec value value = 0 to 100 These commands set the percent of memory space allocated for long and short records to value, where value is a floating-point number representing percent. The example below sets the memory allocation for long records to 10. Note Issuing these commands will clear all the logging data memory. All the existing records should be retrieved using appropriate commands, if required. Send: Receive: set malloc lrec 10 set malloc lrec 10 ok set copy sp to lrec set copy sp to srec set copy sp to stream These commands copy the current selections in scratch pad (sp) into the long record, short record, or streaming data list. The example below copies the current list in scratch pad into the long records list. Thermo Fisher Scientific Model 42i Low Source Instruction Manual B-21